We rebuilt the carburetor in our 1978 Ford Bronco a month or so ago and promised we’d do a follow up post on how to “tune” it. Ours is a 1978 Ford Bronco that goes by the name of Javelina Sue (it’s safe to say she likes her mud). Well, winter is behind us now. It’s getting warm again, and the easiest way to describe the carburetor problem is that she’s “breathing heavy”; the engine idle is irregular and sporadic. So it’s time to give the carb a tune! If you’re not familiar with basic carburetor and choke mechanics, don’t worry Continue reading How to tune the carburetor in a Ford Bronco
Sure you want to rebuild that carburetor! It’s fun and is a good way to ensure your car or truck is running at peak performance – from an air/fuel mixture standpoint. Today, we’re going to rebuild the carburetor in our 1978 Ford Bronco. Ours has a leak, which we suspect is from a float bowl gasket. The fuel is draining onto the intake manifold before the fuel system can build sufficient pressure resulting in the truck not starting. That’s good because if this occurred while the engine was hot and running, it most likely would cause an engine fire and then we’d potentially have all kinds of issues to deal with.
The first thing we need to do is Continue reading How to rebuild a carburetor in a 1978 Ford Bronco